S&A CW-5202BH Enfriador Industrial de Agua para un equipo de soldado 8KW 130-150W CO2 o tubo Laser /2 100W Tubo Laser, AC 1P 220V, 60Hz Mex.$13,067

Wooden Box: There is total one carton box.

Machine Dimension	22.8" x 11.4" x 18.5" (580 x 290 x 470mm)
Machine Weight	57.2ib (26kg)
Package	Carton box
Packing Size	27.6" x 16.9" x 22.8" (700 x 430 x 580mm)
Gross Weight	63.8ib (29kg)

Packing list:

	CW-5202BH water chiller machine	1 set
	Power cable	1 pc
	Connection hose	1 pc
	Sealing washer	2 pcs
	250V/2A spare fuse (Mounted on the power socket interface within the insurance reserve)	1 pc
	User manual	1 pc
	Alarm signal output plug	1 pc
	cooling water additive	1 / 0 bottle

P.S.: cooling water additive is forbidden by express company, so we could not put it into the package. You can buy it from local.
Caution: The appliance is not to be used by children or persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge, unless they have been given supervision or instruction, children supervised not to play with the appliance!

Package:

Note: The Water Chiller is ordering production, need 3 to 5 days of stock up time.

Two-year Comprehensive Warranty for the Equipment & Machine of Sign-in-China.com

Sign-in-China.com guarantees that all the products are qualified in quality and the technical specifications have reached the factory inspection of OQC (Outgoing Quality Control).

(1) The entire body of all equipment or machines (except consumables) we sell is provided with a 2 - year warranty.
(2) Maintenance methods in which two options (either - or) available for the buyer:
· Normal: The buyer sends back a problematic part and Sign-in-China.com will identify whether repair or change a new one.
· Urgent: The buyer purchases a replacement and meanwhile sends back the problematic part, and then Sign-in-China.com will identify and decide whether refund the replacement.
(3) The Start Time of Warranty: Once such an equipment is shipped out.
(4) For maintenance service, please provide the invoice of purchase order (on which it indicates the equipment or machine model number, name and sold date), equipment or machine serial number, trouble or breakdown description, and better attach photo (s) or video (s).
(5) The purchase order PI is the essential proof for maintenance which ensures your legal interest and right. Please keep it properly after purchase.

Additional announcement, the following situations are not covered by the 2-year warranty:

(1) Any product or commodity which was not sold out by Sign-in-China.com (The model number and serial number are not issued by Sign-in-China.com)
(2) Any unauthorized repairing, mistake in use, damage, negligence, misuse, accident, change or modification, quality problem caused by incorrect installation;
(3) Tearing up or modifying of the label or the serial number of such an equipment or machine;
(4) Normal consumption or wearing off such nature usage, wearing down or aging of the cover or shell, plugging or socketing part or unit, etc;
(5) The using environment (temperature & humidity) did not match up the requirement specified in the manual or instruction document;
(6) The trouble or breakdown caused by incorrect operation or failure in following the operation instructed in the manual or instruction document;
(7) The parts or software not purchased from Sign-in-China.com;
(8) The wearing or vulnerable part;
(9) The breakdown or damage caused by nature disaster or force majeure (Such as earthquake, fire, flood, typhoon, thundering, etc).

For Receiving Equipment or Machine:
Normally, we will provide you the pictures of equipment or machine and its packing before shipping in order to proof such item in good condition without damages. When you receive it, suppose you find damage on external packing, instead of signing acceptance, please open it first and check the item inside the packing if there is any damage. If you find damage, you can definitely refuse signing acceptance and then claim loss from the express service company. At the same time, please take photos of the damaged packing and item, and contact us (Either our sales consultant whom you know or send email to “service@sign-in-china.com”). Hence, our people will assist you in handling such dispute

Troubleshooting of water flow alarm of CW-5200 water chiller

The installation of S&A CW-5200 water chiller

How to install CW-5200 water chiller onto the laser cutting machine

Troubleshooting：water chiller CW-5200 is turned on but unelectrified

Filter Installation of S&A CW-5200 water chiller

El vendedor asume toda la responsabilidad de este listado

Envío y manipulación

Cantidad: Pais:

1.Si opta por enviar por expreso, se puede ver que el honorario del envío es un poco alto, pero puede entregar a su puerta dentro de 3-5 días, sólo tiene que hacer el pago y esperar.
2.Si opta por enviar por mar, la tarifa de envío es más bajo, y hay que ir a los puertos para que el liquidación en la Aduana, y tomar la mercancía desde el puerto hasta su casa por sí mismo. Generalmente se toma from10 a 30 días, dependiendo de la dirección del destinatario.

Tiempo de Manejo

Enviará generalmente dentro de 3 días hábiles después de recibir el pago aprobado.

Enviar de Donde?

Tenemos 4 almacenes en el extranjero en todo el mundo que ahora incluye: Rusia, EE.UU., Brasil y México. y Estamos creando otro en Europa. Normalmente, enviaremos su pedido desde el almacén más cercano a usted. si las existencias cerca de usted están agotadas, le enviaremos su pedido a usted directamente de China.

política de devolución

Las compras pueden devolverse en las siguientes condiciones :: 1)Hay problemas de calidad después de abrir el paquete.; 2) Los productos son diferentes que en la lista de pedidos.; 3)Los productos se dañaron irreparablemente durante el transporte.

Detalles del pago

Forma de pago

1.PayPal (pagos en línea)
2.Tarjeta de crédito
3.Transferencia bancaria(T / T)
4.Western Union pago en línea / fuera de línea

Historial De Transacciones

Transacciones: 62

Comprador
Precio Unitario
Cantidad
Fecha De Orden

Lil****
$17339.00
3 set(s)
2020-04-02

Mar****
$17339.00
1 set
2020-03-21

Dee****
$15222.00
3 set(s)
2020-03-07

Ast****
$14567.00
3 set(s)
2020-02-29

Tal****
$14012.00
3 set(s)
2020-02-11

Bra****
$14264.00
3 set(s)
2020-01-26

Gil****
$14264.00
1 set
2020-01-14

Jos****
$13695.00
11 set(s)
2020-01-05

Sar****
$14416.00
1 set
2019-12-29

Cla****
$14416.00
2 set(s)
2019-12-22

Dek****
$13695.00
14 set(s)
2019-12-15

Gar****
$14416.00
3 set(s)
2019-12-09

Isa****
$13551.00
6 set(s)
2019-11-23

Daf****
$14264.00
1 set
2019-10-31

Cla****
$14416.00
1 set
2019-10-11

Rhy****
$14365.00
1 set
2019-09-28

Aar****
$14718.00
2 set(s)
2019-09-05

Har****
$13536.00
1 set
2019-08-22

God****
$13441.00
2 set(s)
2019-07-30

Emi****
$13442.00
1 set
2019-06-19

Ver todo 62 Historial De Transacciones

S&A CW-5202BH Enfriador Industrial de Agua para un equipo de soldado 8KW 130-150W CO2 o tubo Laser /2 100W Tubo Laser, AC 1P 220V, 60Hz

Description
Our CW-5200 is refrigeration type industrial Water Chiller of 1400W cooling capacity. It’s mainly used to have the heat generated during the laser device working that gone through the refrigerating cycle in compressor refrigeration system and eventually transferred to the air. The water temperature is able to be adjusted. There are 2 specifications as 1 water outlet / inlet and dual water outlet / inlet, applicable to cool single laser glass tube.
Have design patent Certificate, CE and RoHS Certificate.
This Water Chiller has been sold largely to Europe, South America, Asia and other markets.
Economic cooling equipment, easy to install and operate, compact and easily movable.

Our industrial water chillers are popular for its 2 temperature control modes as constant temperature and intelligent temperature control. Under intelligent mode, the water temperature is adjusted according to ambient temperature. With that 1 key solution, customers no longer need to worry about the water temperature adjustment of seasonal changes.

Features
• 1400W cooling capacity; optional environmental refrigerant;
• Compact size, long working life and simple operation;
• ±0.3°C precisely temperature control;
• The intelligent temperature controller has 2 control modes, applicable to different applied occasions; with various setting and display functions;
• Multiple alarm functions: compressor time-delay protection, compressor overcurrent protection, water flow alarm and over high / low temperature alarm;
• Multiple power specifications; CE approval; RoHS approval;
• Optional heater and water filter.

Details:

Temperature controller panel:

Under normal circumstance, the new intelligent temperature controller does not need to adjust the controlling parameters.
It will self-adjust controlling parameters according to room temperature, guaranteeing to meet cooling requirements for machines.
Alarm Function’s Description:

Flow alarm and output ports:
In order to guarantee the equipment will not be damaged while cooling water circulation is out of control, CW-5200series chillers possesses an unique low flow alarm protection.

The cooling water circulation loop alarm causes and the work of the state table

	Normal Flow Indicator	Flow Alarm Indicator	Buzzer	Output Ports Hi, H2	Output Ports H1, H3
Circulating pump works properly	ON	OFF	NOT RING	DISCONNECTION	BREAKOVER
Blocked cooling water circulation loop	OFF	ON	RING	BREAKOVER	DISCONNECTION
Alarm of water shortage	OFF	ON	RING	BREAKOVER	DISCONNECTION
Faulted circulating pump	OFF	ON	RING	BREAKOVER	DISCONNECTION
Power interruption	/	/	/	BREAKOVER	DISCONNECTION

Note: The flow alarm is connected to the normally open relay and normally closed relay contacts, requiring operating current less than 5A, working voltage less than 300V.

Comparison


CW5200H Cooling Method: Compression refrigeration Cool for a Single 8KW Spindle or Welding Equipment or 2 x 100W CO2 laser tubes Adopt intelligent controller, it will automatically adjust control parameters according to room temperature changes.	CW5000H Cooling Method: Compression refrigeration Cool for a Single 5KW Spindle or Welding Equipment Cooling Adopt intelligent controller, it will automatically adjust control parameters according to room temperature changes.	CW3000F Cooling Method: Fan Thermolysis Cool for Single 0.8KW / 1.5KW Spindle It's mainly used on the equipment for heat exchange between the heat and the air environment. The water temperature is related to ambient temperature.

One-stop automatic intelligent temperature control: in different environment, user does not need to change setting due to it will automatically switch to appropriate operating temperature.

CW-5200AH, CW-5200BH: Applied to a cool a single 8KW CNC spindle, welding equipment or two 100W CO2 laser tubes.
CW-5200AG, CW-5200BG: Applied to cool a single 130W / 150W CO2 laser tube.
CW-5200AI, CW-5200BI: Applied to a cool single 50W-75W laser diode, a single15W-30W solid-state laser or a single 30W RF laser tube.

Model	CW-5200AG	CW-5200BG	CW-5200DG	CW-5200AH	CW-5200BH	CW-5200DH	CW-5200AI	CW-5200-BI
Voltage	AC 1P 220V	AC 1P 220V	AC 1P 110V	AC 1P 220V	AC 1P 220V	AC 1P 110V	AC 1P 220V	AC 1P 220V
Frequency	50Hz	60HZ	60HZ	50Hz	60HZ	60HZ	50Hz	60HZ
Current	2.4-3.1A	2.6-3.3A	4.5-6.5A	2.4-3.1A	2.6-3.3A	4.5-6.5A	2.4-3.1A	2.6-3.3A
Compressor Power	0.52KW	0.5KW	0.68KW	0.52KW	0.5KW	0.68KW	0.52KW	0.5KW
Compressor Power	0.71HP	0.68HP	0.93HP	0.71HP	0.68HP	0.93HP	0.71HP	0.68HP
Refrigeration Capacity	5084Btu/h	4982Btu/h	5186Btu/h	5084Btu/h	4982Btu/h	5186Btu/h	5084Btu/h	4982Btu/h
	1.49KW	1.46KW	1.52KW	1.49KW	1.46KW	1.52KW	1.49KW	1.46KW
	1281Kcal/h	1561Kcal/h	1307Kcal/h	1281Kcal/h	1561Kcal/h	1307Kcal/h	1281Kcal/h	1561Kcal/h
Refrigerant Charge	360g	380g	350g	360g	380g	350g	360g	380g
Pump Power	0.03KW			0.05KW			0.1KW
Mac. Lift	10M			12M			25M
Max. Flow	10L/min			13L/min			16L/min
Inlet and Outlet	External Diameter: 10mm brass connector						Diameter 10mm speedy connector

Industrial cooling machine’s installation is very simple, the new machine for the first time using, you can install it as following steps.

A. Open the package to check if the machine is intact and all the necessary accessories are completed.

B. Open the injection port to feed cooling water.

Observing the water level gauge and adding water slowly, be careful not to have the water overflowed! For the cooling of carbon steel equipment, the water should be added an appropriate amount of anti - corrosion agentia. Working in cold north area, it’s better to use noncorrosive antifreeze fluid.

C. According to system conditions, please connect the water inlet and outlet pipe well.

D. Plug in power, turn on the power switch. (Do not start up without water in the water tank!)

(1) Power switch turned on, the circulation pump of the chiller starts working. The first time of operating may cause more bubbles in the pipe leading to a flow alarming occasionally, but running for a few minutes later, it will go back to normal.

(2) After the first boot, you must immediately check whether the water pipe leaks.

(3) Power switched on, if the water temperature is below the set figure, it is normal that fans and other components of the machine do not work. The temperature controller will automatically control the working conditions of the compressor, magnetic valve, fans and other parts based on the set controlling parameters.

(4) As it takes a longer time to start the compressor and other components, according to different conditions, the time is range from seconds to minutes, so do not turn off the power and again on frequently.

E. Check the water level in the water tank.

The first startup of the new chiller empties the air in the water pipe, leading a slight water level decline, but in order to keep the water level in the green area, it’s allowed to add adequate water again. Please observe and record the current water level, and inspect it again after the chiller running for a period of time, if the water level drops obviously, please re-inspect the water pipeline leakage.

F. Adjust parameters of temperature controller.
CW-5200 series use an intelligent thermostat. Normally users do not need to adjust it. If it is really necessary, please refer to “Operating status and parameters adjustment.”

One of the differences between the CW5200 water tank and the CW3000 tank lies in that the CW5200 water tank can keep the water at a uniform temperature. Its cooling function can keep the temperature at a certain value, which can be adjusted manually. All the parameters related to the water tank have been set as the correct value by our company before delivery. The user may refer to the parameter instruction manual of the water tank for detailed description on the parameters. It is strongly suggested that the user should not change the parameters without authorization. Our company accepts no responsibility for any insolvable problems caused by the user’s unauthorized changing of parameters

Maintenance

Cooling machine used in long term, you should open the machine and clean the dust in order to ensure good heat dissipation. You can use non – corrosive antifreeze if you are in the northern cold regions.

Cautions

1. Please ensure that the power supply and electrical outlet are in good contact and the earth wire must be firmly grounded! Although the average operating current of the chiller is small, but the instantaneous operating current could be up to 6 ~ 10amps sometimes (The instantaneous operating current of models of AC110V power supply are possible to be up to 10 ~ 15amps).

2. Please make sure there is a stable and normal voltage for the working chiller! As the refrigeration compressor is more sensitive to the power supply and voltage, so the operating voltage of our standard product is of 200 ~ 250V (110V model
is of 100 ~130V). If you do need a wider operating voltage range, customization is available for us.

3. To protect the pump, it’s strictly forbidden to run the chiller without having water in the storage water tank! The new machine is packed after draining whole water in the tank, so please make sure the tank has water inside before machine starting, otherwise it’s easily to have the pump damaged. When the water level is below the green (NORMAL) range of the water level gauge, the cooling capacity of our chiller will go down slightly. Hence please ensure the water level is within the green (NORMAL) range. To drain through circulating pump is strictly prohibited!

4. Please be sure that the air inlet and air outlet are in good ventilation! There must be at least 30cm from obstructions to the air outlet which is in the back of the cooler, and should leave at least 8cm between obstructions and the side air inlet.

5. The filter screen must be regularly cleaned! It’s essential to unpick and wash the dust gauze, or the serious blockage will cause breakdown to the chiller.

6. Please pay attention to the effect of the condensate water! With greater ambient humidity, when the water temperature is lower than the ambient temperature, the condensate water will generate on the surface of water circular pipes and the cooled components. If above circumstance appears, it is recommended to set a higher water temperature or keep pipes and cooled parts warm.

Application:
1.CW-5200 industrial water chiller cool for a single 8KW spindle

2.CW5200 water chiller cool for 2 x 100W laser tube

3.CW5200-water-chiller-cool-for-cnc-machining-center-lathe

4.CW5200-water-chiller-for-cooling-argon-arc-welding-clamp

5.CW5200-water-chiller-cool-for-lab-vacuum-pump

6.CW5200-water-chiller-cool-for-SYNRAD-RF-metal-lasers

7.CW5200-water-chiller-cool-for-blender

Quality report

1. I don’t know this website well, how can I trust you?

Sign-in-China.com has launched online bussiness for 6 years who already has established customers over 120 countries and areas. We are the lifelong member of ISA and SGIA, and the verified user of PayPal as well as approved by BBB certification.

Learn more about us from the following links:

19th Reklama Pholygraf Trade Fair 2012

ISA International Sign Expo 2012

Exhibition of International Trade Fair for Visual Communication, Technology and Design in Düsseldorf, 2011

More

Buyers say:

John Hanmer from USA

Jackson, Andy and David from UK

Ben Wong from Thailand

Adam Fernanders from South Africa

JLuciano from Brazil

Adam Fernanders from Australia

More

2. Not clear about the Price Policy of Sign-in-China.com?

3. How to pay? Can I use credit card?: You may use the following methods of payment: PayPal online payment, PayPal direct payment, credit card (through PayPal gateway, some areas may be restricted), bank transfer, and Telegraphic Transfer (T/T) payment.; For details, please refer to the following:; a) PayPal online payment
https://www.paypal.com/webapps/mpp/buying-online

b) PayPal direct payment (our PayPal account: lyh@chinasigns.cn)
https://www.paypal.com/webapps/mpp/make-online-payments

c) Credit card payment (through PayPal gateway, some areas may be restricted)
https://www.paypal.com/us/webapps/helpcenter/article/?articleID=94038&topicID=11500008&m=TTQ

d) Bank transfer
https://www.paypal.com/us/webapps/helpcenter/article/?articleID=94040&topicID=11500008&m=TTQ

e) Telegraphic Transfer (T/T) payment
(1) Place an order
(2) Get the bank account information of Sign-in-China.com
(3) Make the payment at the bank, and get the Payment Receipt
(4) Send the Payment Receipt to service@sign-in-global.com
(5) Receive the Tracking Number of your order
(6) Wait for your order.

4. Is it safe to pay online? Will it occur any security problems concerning my personal information?: PayPal, one of the faster and safer ways to pay and get paid online, has worldwide 113 million active accounts, and supports 190 markets and 25 currencies. As a result, PayPal enables global commerce. For details:
https://www.paypal.com/webapps/mpp/paypal-safety-and-security

5. Why did my PayPal payment fail?: The main reasons of failures and solutions:; a) Confirm if your credit card requires verification:
https://www.paypal.com/us/webapps/helpcenter/article/?solutionId=10568&m=SRE; b) Confirm if you have exceeded the limitation of maximum amount
https://www.paypal.com/us/webapps/helpcenter/article/?solutionId=11516&m=SRE; c) Confirm if you have any other restrictions
https://www.paypal.com/us/webapps/helpcenter/article/?articleID=94053&m=SRE

6. How can I know if it is paid successfully?: We will send you a payment confirmation email upon receiving your payment, and your purchase order in “My Account” will be categorized as “Paid”. If you use check or Telegraphic Transfer (T/T) payment, we will change the status of your order until your payment confirmed , and then we will send you the conformation email.

7. How long can I receive the items?: Normally speaking, we will spend 1 or 2 days to prepare the order and if it requires longer time, we will inform you as soon as possible. The general shipping time will be 3 to 7 days. Therefore, under normal situation, you will receive the items in 4 to 9 days.

8. How to receive my order ? Is it safe during shipping?: For the items you purchased online, we will arrange international express delivery to ship and usually the carriers are FedEx, TNT, UPS, DHL, or EMS. It shall be quite safe during shipping with substantial package. Additionally, we will purchase insurance as a gift for your package.

9. How to obtain the tracking number of shipment? And how to contact the carrier (express delivery company)?: We will send you the tracking number after shipping your items, hereby please keep on checking your email.

10. How to return items and how about the warranty?: For details, please click the following links:; Changes & Returns: http://www.sign-in-global.com/info/ChangesandReturns.html; Warranty: http://www.sign-in-global.com/info/QualityWarranty.html

11. If I still have questions to this product, what shall I do?: Please click on the product page and submit your questions, we will reply you as soon as possible.

12. How to change my shipping address?

You can change your shipping address on the confirmation page of your purchase order.

Este producto no tiene atributos!

Preguntas y Respuestas

S&A CW-5200BH Industrial Water Chiller for One 8KW Spindle / Welding Machine / 2 x 100W CO2 Laser Tubes Cooling, 0.68HP, AC 1P 220V, 60Hz

Model	CW-5202BH
Power Supply	AC 220V, 60Hz
Current	2.6~3.3A
Compressor Power	0.5KW
Compressor Power	0.68HP
Refrigerating Capacity	4982Btu/h
	1.46KW
	1256Kcal / h
Refrigerant	R-22 / R-134a / R-410a
Refrigerant Charge	380g
Precision	±0.3°C
Tank Capacity	6L
Reducer	Capillary
Protection	Over current protection for compressor, flow alarm, over temperature alarm
Pump Power	0.03KW
Maximum Flow	13L / min
Maximum Pumping Lift	12M
Inlet and Outlet	External Φ10mm brass connector
Net Weight	26kg
Gross Weight	29kg
Product Dimension	22.8" x 11.4" x 18.5" (580 x 290 x 470mm)
Package Dimension	27.6" x 16.9" x 22.8" (700 x 430 x 580mm)

Alarm function

E1	E2	E3	E4	E5
Over high room temperature	Over high water temperature	Over low water temperature	Room temperature sensor failure	Water temperature sensor failure

Remark:

When alarm occurs, the error code and the temperature will be alternately displayed.

In alarming state, the alarm sound could be suspended by pressing any button, but the alarm display
remains until the alarm condition is eliminated.

Thermostat parameters list:

Order	Code	Project Setting	Range	Factory Setting	Notes
1	F0	Temperature setting	F9 – F8	25	Constant temperature control effecting
2	F1	Temperature difference values	-15 - +5	-2	Intelligent control effecting
3	F2	Cooling hysteresis	0.1 – 3.0	0.8
4	F3	Way of control	0 - 1	1	1: intelligent 0: constant temperature
5	F4	Alarm for over high water temperature	1 - 20	10
6	F5	Alarm for over low water temperature	1 - 20	15
7	F6	Alarm for over high room temperature	40 - 50	45
8	F7	Password	00 - 99	8
9	F8	The allowed highest water temperature	F0 - 40	30
10	F9	The allowed lowest water temperature	1 – F0	20