Codigo del articulo:CNCR-CP-1318
Precio : Mex.$ 162,298 - 180,331/set (Aviso de Descuento) (Tiempo entrega 69-89 días)
Peso de Envio: 1716.0lb (780kg) Flete
Lead Time: After receiving customer's deposit, within 10 - 25 days.
Wooden Box: There is total one wooden box or pallet.
CNCR-CP-1318
Machine Dimension
|
1790mm x 2580mm x 1400mm (70" x 102" x 55")
|
|
Machine Weight
|
1386lb (630kg)
|
|
Package | Wooden box, Fumigation free package | |
Packing Size | 2700mm x 2000mm x 1600mm (106" x 79" x 63") | |
Gross Weight | 1606lb (730kg) |
Main Parts List
Z axis parts
pictures
Description
Screw and Plug Size
Type of Screw and Plug
Quantity
Spindle Holder
M6X25
Hexagon screw
4
Spindle
M6X25
Hexagon screw
4
Spindle Dust Cover
M5X10
Round head stainless steel screw
4
Spindle Power Cable
7 pin
Male type plug (Positive)
1
Tool Sensor
4 pin
Female type plug (Negative)
1
Fixed Plate for the Tank Chain
M4X10
Round head stainless steel screw
1
Controller parts
Controller
M4X15
Round head stainless steel screw
4
Single Cable
26 pin
Male type plug (Positive)
1
Power Cable
12 pin
Female type plug (Negative)
1
Remote
26 pin
Male type plug (Positive)
1
Controller accessories
Controller Support Beam
M10X65
Hexagon screw
1
CD
26 pin
1
Ethernet Cable
1.5 - 3m
RJ-45
1
Toolbox list
Each machine will have its own toolbox list located in the machine. The list may not have the same parts listed below as each machine has different tools.
Description | Specification | Quantity | Remark | |
Toolbox | 13" | 1 | ||
Clamps | ER16, Ø3.175mm | 1 | Installed on the spindle | |
Clamping nuts | ER16 | 1 | Installed on the spindle | |
Clamps | ER16, Ø6mm | 1 | ||
Single - head open - end wrenches | H25 | 1 | ||
Double-head open-end wrenches | 22-24 | 1 | ||
Inner hexagon wrenches | 5mm | 1 | ||
Flat tip screw drivers | 6 x 100 | 1 | ||
Cross tip screw drivers | 6 x 100 | 1 | ||
Flat bottom engraving bits | 3.175 x 20 x 0.2 x 33 | 1 | ||
Flat bottom engraving bits | 3.175 x 20 x 0.3 x 33 | 1 | ||
Flat bottom engraving bits | 3.175 x 30 x 0.2 x 33 | 2 | ||
Flat bottom engraving bits | 3.175 x 30 x 0.3 x 33 | 1 | ||
Half straight bits | 3.175 x 1.0 x 3 x 33 | 1 | ||
Half straight bits | 3.175 x 2.0 x 6 x 33 | 1 | ||
Two spiral flute bits | 3.175 x 12 x 38 | 1 | ||
Two spiral flute bits | 3.175 x 22 x 45 | 1 | ||
One spiral flute bits for acrylic | 3.175 x 12 x 38 | 1 | ||
Workpiece pressing plates | 1# | 6 | Ø8 nut, washer, T screw 8 x 45, flat pressing plate | |
Paint brushes | 2" | 1 | ||
Controller keys | 2 |
Note: There may have some changes to the toolbox list because of updates. Please consult your toolbox list for the tools included in your toolbox.
Package:
Comprehensive guarantee for one year except the wearing parts
24 - hour technical support by email or calling
User - friendly English manual for machine using and maintaining
Spare Parts Supports
We provide all replacement parts for all machines we sold, if you have a parts that break beyond warranty period, you could order it directly from us at reasonable prices. We would post the new parts with step by step instructions in PDF format on how to replace the parts to you.
If you want to buy any parts from us, please tell us the names or pictures of the parts.
Satisfaction Guarantee
For the items other than consumable products sold via www.Sign-in-China.com, we provide 12 months warranty after shipment. All the extra parts for equipment can be purchased from www.Sign-in-China.com. Further, for our VIP customers, the period of warranty shall be extended to 18 months.
We offer 14 days 100% satisfaction guarantee on all our machines. If you are not satisfied after receiving an item, Sign-in- China.com promises that, within 14 days after actual delivery of such an item, you are allowed to return the item to us and get complete refund, provided the returned item does not affect its subsequent re - selling and you also undertake the charge of returning delivery.
More information, please look at the document of Training & Warranty & Service Policies.
El vendedor asume toda la responsabilidad de este listado
Cantidad: Pais:
Envío y manipulación | Para | Servico | Entrega* |
US $75.00 | Estadpos Unidos | Entrega express: TNT/DHL/FEDEX/UPS | Estimado entre |
Tiempo de Manejo |
Enviará generalmente dentro de 3 días hábiles después de recibir el pago aprobado. |
Tenemos 4 almacenes en el extranjero en todo el mundo que ahora incluye: Rusia, EE.UU., Brasil y México. y Estamos creando otro en Europa. Normalmente, enviaremos su pedido desde el almacén más cercano a usted. si las existencias cerca de usted están agotadas, le enviaremos su pedido a usted directamente de China. |
|
Forma de pago |
|
Historial De Transacciones
Transacciones: 5
Sale a la venta Maquina Grabadora Serie CNF-CP-Y para la industria Publicitaria. Tiene una nueva apariencia, alta velocidad y alta precisión. Viene con sistema de control DSC, pantalla LCD HD y una interfaz amigable. Máquina de grabado de eje doble Y, el último modelo, es precisa como máquinas del tornillo y rápido como máquinas de grabado de cremallera y piñón.
Información de configuración principal:
Área de grabado: 1300 mm x 1800 m m (51 "x 71")
Altura de elevación del pórtico: 106mm (4.3")
Velocidad máxima: 25000mm (984") / min
Eje: 2.2KW refrigerado por aire chino
10 herramientas de grabado de la PC
Mesa de trabajo, vía circular Leadshine conductores de aleación de aluminio
Controlador de pantalla de la DSC-931 Color 3.5", doble eje, motor paso a paso
Manija de control remoto | Refrigerado por huso chino aire acondicionado, velocidad 24000 rpm |
Doble eje Y, conducción doble grabado de la máquina, es preciso como máquinas del tornillo y rápido como máquinas de grabado de cremallera y piñón. |
Sensor de herramienta se garantiza exactitud de trabajo y calidad de grabado. |
• Esta máquina de grabado de la serie tiene función de "Corte en ángulo" con sistema de control DSC. "Corte en ángulo" puede hacer menos ocasión de la pieza de trabajo suelta y sin marcas de traza. (Cuando la herramienta llegua a la esquina, pero no a la parte inferior, es bastante comun que se afloje). Más detalles de la operación de la función de "Corte en ángulo", consulte el manual del software.
Aplicaciones
Carteleras, placas de doble color ABS, modelos en miniatura, plexiglás, madera, artículos, etc..
Instrucción
Sensor de herramienta se garantiza exactitud de trabajo y calidad de grabado.
En primer lugar confirmar punto 0 del archivo grabado (hacer centro del grabado material como punto 0 o la esquina inferior derecha como punto 0) y luego decidir cómo poner el material grabado en la mesa de trabajo. A continuación fijar el material grabado para arriba y el sensor puesto en el it, luego mover X, Y, eje Z por el teclado o el mando a distancia al sensor, una vez tocado, la herramienta se elevará automáticamente, al mismo tiempo que la máquina recordará la altura por defecto para mantener la precisión del proceso. (Más detalles consultar el manual del software de control de máquina)
La tuerca y la brida se usan para fijación de herramientas de corte en el eje. El diámetro de las herramientas de corte debe correspondiente al diámetro de la abrazadera. Las abrazaderas tienen Φ3.175, Φ4, Φ6, Φ8 modelos, a excepción de las herramientas de corte especiales.
Instalación de herramienta
Grabado material de sujeción
Diferentes herramientas tienen efecto de grabado diferente.
Herramienta perforación: Utiliza principalmente para tallar caracteres, pequeño material
Fresa: Utilizado principalmente para moler de cara, el corte y procesamiento de áspero
Herramienta del nudo: Se utiliza principalmente para el procesamiento, como textura de carácter y especial de modelado en 3D de forma especial.
Observación: Aquí solo algunos tipos de referencia, otros se basan en los artículos reales.
La máquina debe instalarse en un terreno plano. Prestar atención a los siguientes consejos:
• Ambiente de temperatura de trabajo 0-40 ° C
• Humedad de funcionamiento 30-75%
• Tensión 220V + / - 10%
Cable a tierra • la máquina debe instalarse correctamente para evitar corto circuito y daños.
• La máquina debe instalarse en un ambiente amplio con mucho espacio. No debe instalarse cerca de otra máquina, que puede causar interferencia. La máquina no puede funcionar correctamente en estos casos.
• La máquina debe ser estable en las patas.
Asegúrese de que hay suficiente espacio alrededor de la máquina, especialmente alrededor de la grúa y el controlador.
1. Instalación de la máquina - Instalación piezas
Incluye: Eje Z partes de instalación, instalación del controlador, instalación de eje, conexión de cable y montaje del sensor de herramienta, etc.
Obtener más información, consulte el Manual del usuario.
2. grabado instalación del Software, editar la imagen que se desea procesar
3. Fije las piezas en la mesa de trabajo, comienza el proceso de
4. Trabajo terminado!
Productos destacados
• Que puede trabajar sin conexión. Nueva apariencia, alta velocidad y alta precisión
• Utiliza un conector USB 2.0 de alta velocidad y puede transferir a velocidades de hasta 12 MB/segundo.
• Es un conector de Ethernet y una gran memoria interna, haciéndola fácil descargar los datos.
• El nuevo convertidor digital analógico hace mucho más fácil cambiar la velocidad del huso mediante el controlador. El controlador utiliza la tecnología DSC, mejorar la velocidad de procesamiento de datos.
• Cuando el trabajo de mezcla de líneas rectas y arcos, hará la salida muy suave.
• El controlador tiene las mismas funciones anteriores como el corte en ángulo para cortes más suaves, memoria de fallo de alimentación del último punto, reiniciar el trabajo en cualquier línea, etc..
• El sistema tiene muchas funciones avanzadas como rampa de entrada, apagado la memoria, reiniciar en cualquier línea. Y también muchos modos de procesamiento como modos profesionales incluyendo corte de velocidad constante, modo 2D, modo 3D, modo duplicar, modo de imagen de espejo, exploración perforación modo y modo personalizado.
Informe de la calidad:
Learn more about us from the following links:
19th Reklama Pholygraf Trade Fair 2012
ISA International Sign Expo 2012
Buyers say:
Jackson, Andy and David from UK
Adam Fernanders from South Africa
a) The Stepped Price
According to the different procurement quantities of customers, Sign-in-China.com formulates different price levels for commodity. Hence, your purchase price will be ultimately attributed to the procurement quantity.
The Stepped Prices shown on the product page is as following:
b) Trial Order Price / Sample Price
We offer free samples or some lower priced products(the product price plus shipping cost only)for our customers easily to experience our products and services from purchasing.
For details, please click:
http://www.sign-in-global.com/product/sampleproduct.html
c) Limited Time Offers
Every Tuesday Sign-in-China.com releases the latest products for Limited Time Offer, and after one week, the original price will be recovered. We sincerely expect your timely attention to the discount activities of Limited Time Offers on Sign-in-China.com.
For details, please click:
http://www.sign-in-global.com/product/discount.html
d) Flash Wholesale
Every Monday Sign-In-China.com and cooperation factory jointly campaigns the Flash Wholesale products for bulk purchase customers, and after a week, the original price will be receovered. We sincerely expect your timely attention to the preferential activities on Sign-In-China.com.
For details, please click:
http://www.sign-in-global.com/product/featuredproduct.html
e) You decide the prices for Bulk Orders
If the commodity quality you choose beyonds the quantity of fourth step price on Sign-in-China.com, or if you think the website stepped prices don’t meet your bulk purchase demand, you can use our "Make Offer" service on Sign-in-China.com to fill out your planned purchase quantity and target price then submit as a Bulk Order, for which we will review and endeavor to realize the deal with you.
If you need bulk order , please enter here to Make Offer:
a) PayPal online payment
https://www.paypal.com/webapps/mpp/buying-online
b) PayPal direct payment (our PayPal account: lyh@chinasigns.cn)
https://www.paypal.com/webapps/mpp/make-online-payments
c) Credit card payment (through PayPal gateway, some areas may be restricted)
https://www.paypal.com/us/webapps/helpcenter/article/?articleID=94038&topicID=11500008&m=TTQ
d) Bank transfer
https://www.paypal.com/us/webapps/helpcenter/article/?articleID=94040&topicID=11500008&m=TTQ
e) Telegraphic Transfer (T/T) payment
(1) Place an order
(2) Get the bank account information of Sign-in-China.com
(3) Make the payment at the bank, and get the Payment Receipt
(4) Send the Payment Receipt to service@sign-in-global.com
(5) Receive the Tracking Number of your order
(6) Wait for your order.
Bank transfer payment information:
Learn more about us from the following links:
19th Reklama Pholygraf Trade Fair 2012
ISA International Sign Expo 2012
Buyers say:
Jackson, Andy and David from UK
Adam Fernanders from South Africa
For details, please refer to the following:
a) Bank Transfer (T/T) payment
(1) Place an order
(2) Get the bank account information of Sign-in-China.com
(3) Make the payment at the bank, and get the Payment Receipt
(4) Send the Payment Receipt to service@sign-in-global.com
(5) Receive the Tracking Number of your order
(6) Wait for your order.
Bank transfer payment information:
b) PayPal online payment https://www.paypal.com/webapps/mpp/buying-online
c) PayPal direct payment (our PayPal account: lyh@chinasigns.cn) https://www.paypal.com/webapps/mpp/make-online-payments
d) Credit card payment (through PayPal gateway, some areas may be restricted) https://www.paypal.com/us/webapps/helpcenter/article/?articleID=94038&topicID=11500008&m=TTQ
e) Bank transfer (through PayPal gateway) https://www.paypal.com/us/webapps/helpcenter/article/?articleID=94040&topicID=11500008&m=TTQ
f) Western Union Payment
Receiver’s First name: Zifei Receiver’s Last name: Li Address: 4th Floor., Building No.8, Community No.12. Advanced Business Park, No.188 Western Road of the 4th Ring, Fengtai, Beijing.
a) Confirm if your credit card requires verification: https://www.paypal.com/us/webapps/helpcenter/article/?solutionId=10568&m=SRE
b) Confirm if you have exceeded the limitation of maximum amount https://www.paypal.com/us/webapps/helpcenter/article/?solutionId=11516&m=SRE
c) Confirm if you have any other restrictions https://www.paypal.com/us/webapps/helpcenter/article/?articleID=94053&m=SRE
If you failed to make payment via PayPal, please choose Bank Transfer(T/T) or Western Union Payment.We will ship your order by Express or by sea and usually the carriers are FedEx, TNT, UPS, DHL, or EMS. It shall be quite safe during shipping with substantial package. It shall be quite safe during shipping with substantial package. Additionally, we will purchase insurance as a gift for your package.
For details, please click the following links:
Changes & Returns: http://www.sign-in-global.com/info/ChangesandReturns.html
Warranty: http://www.sign-in-global.com/info/QualityWarranty.html
Engraving Software | Ucancam V10, Type3, Router 8, and Type3, etc.(Optional) |
Type Of Worktable | Aluminum slot |
Repetition Precision | ± 0.03mm |
Spindle Power | 1.5KW Chinese air cooled |
Maximum Engraving Speed | 7200mm (283") / min |
Maximum Engraving Area | 1300mm x 1800mm (51" x 71") |
Interface | USB / Ethernet |
Parámetro esencial
Modelo |
CNF-CP-1318Y |
Precisión repetibilidad |
±0. 03 mm |
Máximo |
1300 x 1800 mm (51 "x 71") |
Energía del huso |
1,5 KW China refrigerado por aire |
Velocidad del huso |
24000r/min |
Diámetro de la herramienta de corte |
Ø3.175, Ø4, Ø6, Ø8 |
Recorrido del eje Z |
110mm (4.3") |
Velocidad de movimiento máxima |
7200mm (283") / min |
Trabajo tamaño de la tabla (X, Y) |
1360 x 2270 mm (53,5 "x 89 '') |
Tensión |
AC220V ± 10%, 50Hz |
Consumo |
2.5KW |
Software de grabado |
Type3 |
Interfaz de |
USB / Ethernet |
Tipo de la mesa de |
Ranura de aluminio |
Nota: Los parámetros pueden variar. Utilizar las normas técnicas de empresa como base.
Escriba un comentario para Router CNC AD de Alta precisión 51" x 71" (1300mm x 1800mm)
Router CNC AD de Alta precisión 51" x 71" (1300mm x 1800mm) Mex.$162,298 - 180,331/set Min. Order : 1 set |
|